Eizo FLEXSCAN MX190 Manual do Utilizador descarregar pdf (Página 23)

RadiCS

Chapter 3 Monitor Calibration

English

Swing Sensor/Integrated Front Sensor

[Procedure]

1. When

clicking [Conﬁguration] - [Change Settings] on the menu bar, the setting

dialog appears. Click [Monitor List] to display the monitor list screen.

Currently connected monitors appear in the list, grouped by the type of graphics board.

2. Locate the monitor to which the Swing Sensor/Integrated Front Sensor is

installed, select Sensor from the tree, and click the right mouse button.

Use this sensor Select whether to use the Swing Sensor/Integrated Front Sensor

with RadiCS.

Correlation Adjust the Swing Sensor/Integrated Front Sensor to correlate data

during the monitor measurement.

Measure ambient

luminance

Measure the ambient luminance.

Presence Sensor

Turn the Presence Sensor ON/OFF (initially set to OFF) and set

the detection level*.

When set to ON, the Presence Sensor can detect the movement

of the person and executes a schedule when you move away from

the monitor.

Note

• These sensor settings are available only when a Clip-On Swing

Sensor G2/Presence Sensor is installed.

• These settings are available only in advance mode.

• T

o execute a schedule when you move away from the monitor,

enable the “Executes the process when the operator is not

present” check box under schedule setting. (Refer to page 48.)

• I

f using multiple monitors, set Presence Sensor to ON for one

monitor only.

Tips

• If the sensor does not work normally, check the following:

• There is something that reﬂects the light such as mirror or

glass in front of the sensor.

• The monitor is located in a place that receive direct sunlight.

• There is some infrared device near the monitor

• There is some obstacle in front of the sensor

• T

here is no dirt on the sensor. Clean the sensor with a soft

cloth.

• Y

ou are sitting in front of the monitor and the monitor is

tilted at the correct angle so that the sensor can detect the

operator. The infrared ray is emitted vertically from the

sensor to detect a person.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 98 99

Comentários a estes Manuais

Sem comentários

Eizo FLEXSCAN MX190 Manual do Utilizador Página 23

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de vídeo p/ automóveis Eizo FLEXSCAN MX190