Eizo FLEXSCAN MX190 Manual do Utilizador descarregar pdf (Página 20)

RadiCS

Chapter 3 Monitor Calibration

English

4. Click the right mouse button on the monitor and select “Calibration setting”.

5. Set up each item.

Tips

• Click [Default] to set the default values.

Note

• When calibrating an EIZO FlexScan M series monitor or a monitor made by another

manufacturer using a LS-100 sensor, disable the “Lamb” check box.

Measurement Level

Low Shorten the measuring time.

Standard Set up the default.

High Emphasize the measurement accuracy. It takes longer.

Target

Lmax Enter a maximum target of luminance.

Lmin Enter a minimum target of luminance.

Enable the check box, “Set as the low limit” when setting up

measured monitor minimum luminance in Lmin.

Color Select a target for color temperature target from the pulldown

menu on color monitors.

When selecting “Custom”, the color (x, y) measured on the

monocrome monitor can be set.

Select “OFF” to set up the original color of the LCD panel. The

color temperature cannot be set up in a monochrome monitor.

Tips

• The setting ranges of Lmax and Lmin vary depending on monitors. The baseline value

for a luminance check is changed automatically when the Lmax and Lmin values are

modiﬁed.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 98 99

Sem comentários

Eizo FLEXSCAN MX190 Manual do Utilizador Página 20