Eizo FlexScan S2000 Manual do Utilizador descarregar pdf (Página 15)

Chapter 2 Settings and Adjustments

● To adjust extra or cut image [Resolution]

This adjustment is available to equalize the resolution shown on the

Setting menu and the resolution of input signal.

(1) Choose <Resolution> from the <Screen> menu, and press

The <Resolution> menu appears.

(2) Adjust the vertical resolution with or , and then horizontal

resolution with

or , and press .

The adjustment is completed.

Extra image is displayed due to excessive dots.

A part of image is cut due to short dots.

Adjust the signal output range

● To adjust color gradation automatically [Range Adjustment]

Every color gradation (0 to 255) can be displayed by adjusting the

signal output level.

(1) Choose <Range Adjustment> from the <Screen> menu, and press

A message “Your setting will be lost it you press AUTO button” appears.

(2) Press while the message is displayed.

The output range is adjusted automatically to display images with the

maximum color gradation.

All the adjustments using the “Screen Adjustment Program” are completed.

Change the smoothing setting.

● To modify blurred characters/lines [Smoothing]

When a low-resolution image is displayed in the “Full” or “Enlarged”

mode, the characters or lines of the displayed image may be blurred.

(1) Choose <Screen> from the Adjustment menu, and press

(2) Choose <Smoothing> from the <Screen> menu, and press

The <Smoothing> menu appears.

(3) Select a suitable level from 1 to 5 (where 1 = soft and 5 = sharp)

with

or , and press .

The smoothing adjustment is completed.

Attention

• [Smoothing] is disabled when the

screen is displayed in the following

resolutions.

• 1600 × 1200

• 800 × 600

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Sem comentários

Eizo FlexScan S2000 Manual do Utilizador Página 15