Eizo FlexScan EV2023W Manual do Utilizador descarregar pdf (Página 35)

Chapter 5 Reference

5-1 Attaching an Arm

The stand can be removed and replaced with an arm (or another stand) to be

attached to the monitor. Use an arm or stand of EIZO option.

When using the monitor with "Portrait" position, change the

position to "Landscape".

Lay the LCD monitor on a soft cloth spread over on a stable

surface with the panel surface facing down.

Attention

• When attaching an arm or stand,

follow the instructions of their user’s

manual.

• When using another manufacturer’s

arm or stand, conrm the following in

advance and select one conforming to

the VESA standard. Use the M4 × 12

screws supplied with this monitor.

– Clearance between the screw holes:

100 mm × 100 mm

– Thickness of plate: 2.6 mm

– Strong enough to support weight of

the monitor unit (except the stand)

and attachments such as cables.

• When using an arm or stand, attach it

to meet the following tilt angles of the

monitor.

– Up 45 degrees, down 45 degrees

(horizontal display, and vertical

display rotated 90 degrees

clockwise)

• Connect the cables after attaching an

arm.

• Do not move the removed stand up

and down. Doing so may result in

injury or device damage.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 52 53

Sem comentários

Eizo FlexScan EV2023W Manual do Utilizador Página 35