Eizo FlexScan EV2023W Manual do Utilizador descarregar pdf (Página 15)

Chapter 2 Settings and Adjustments

2-2 Screen Adjustment

Digital Input

When digital signals are input, images are displayed correctly based on the

preset data of the monitor, but if characters and/or lines appear blurred, go to

step 6 “To modify blurred characters/lines [Smoothing]”. When performing

more advanced adjustment, see “2-3 Color Adjustment” (page 18) and

subsequent pages.

Analog Input

The monitor screen adjustment is used to suppress ickering of the screen or

adjust screen position and screen size correctly according to the PC to be used.

The Self Adjust function works when all of the following

conditions are satised:

• When a signal is input into the monitor for the rst time

• When the resolution or Vertical/Horizontal Frequency not

displayed before is set

If the screen is not displayed correctly even after performing the Self Adjust

operation, adjust the screen according to the procedures on the following pages

to use the monitor comfortably.

[Adjustment Procedure]

Perform the auto adjustment.

● Toadjustickering,screenposition,andscreensize

automatically [Screen]

(1) Choose <Screen> from the <Auto Adjustment> menu, and press

The <Auto Adjustment> menu appears.

(2) Choose <Execute> with or , and press .

Flickering, screen position, and screen size are corrected by the auto-

adjustment function.

If the screen is not displayed correctly even after adjusting in step

1 above, perform the adjustments according to the procedures on

the following pages. When the screen is displayed correctly, go to

step 5 “To adjust color gradation automatically [Range]”.

Prepare the display pattern for the analog display adjustment.

Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen

adjustment pattern les”.

Attention

• This function works correctly when

an image is fully displayed over the

Windows or Macintosh display area.

It does not work properly when an

image is displayed only on a part of

the screen (command prompt window,

for example) or when a black

background (wallpaper, etc.) is in use.

• This function does not work correctly

with some graphics boards.

• “Auto in Progress” appears on the

screen during auto adjustment.

Attention

• This function works correctly when

an image is fully displayed over the

Windows or Macintosh display area.

It does not work properly when an

image is displayed only on a part of

the screen (command prompt window,

for example) or when a black

background (wallpaper, etc.) is in use.

• This function does not work correctly

with some graphics boards.

• “Auto in Progress” appears on the

screen during auto adjustment.

NOTE

• For details and instructions on opening

the “Screen adjustment pattern les”,

refer to the “Readme.txt” le.

NOTE

• For details and instructions on opening

the “Screen adjustment pattern les”,

refer to the “Readme.txt” le.

Attention

• Wait 30 minutes or more from

monitor power on before starting

adjustments. It is recommended

to turn off the EcoView Sense to

prevent the monitor from shifting to

the power saving mode in this period

(Refer to "2-9 Shifting to the power

saving mode when a person leaves the

monitor [EcoView Sense]" on page

23).

• Auto adjust function does not work

for the images under the resolution of

800 × 600 (SVGA).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 52 53

Comentários a estes Manuais

Sem comentários

Eizo FlexScan EV2023W Manual do Utilizador Página 15

Comentários a estes Manuais

Manuais e produtos relacionados com TVs e monitores Eizo FlexScan EV2023W