Eizo eClient SC1 Manual do Utilizador descarregar pdf (Página 6)

English

6 1. INTRODUCTION

Server PC

Console Sets commands and sends them to the NA

Service.

Network

Administrator

NA Service Receives the commands from the Console, and

manages the Clients.

Remote Boot Service Remote Boot Service is used to store or distribute

the Firmware of Windows XPe-Embedded based

Client(s). Install the Remote Boot Service into the

same computer with the NA service. (p.12)

FTP service

Stores the Client configuration file(s) and the

firmware file(s), and sends these files to the

Client(s).

DHCP service Allocates IP addresses to the Clients with DHCP

or sends the configuration to the Clients. (The

Clients are set to refer to the DHCP server and

allocate IP addresses at the factory default or right

after firmware update. If not using the DHCP

service, IP addresses must be set up in each

Client directly.)

When using the Remote Boot Service, the Client

requires the DHCP service. (Client, DHCP service

and Remote Boot Service communicate mutually.)

Terminal Server Is required when a user operates a Client. Must

be logged off from the Clients when operating the

Terminal Server (Client setup and management).

Clients

Clients Set up and managed by the Network

Administrator.

Must have equipped Client setup management

tool client software.

There are Windows CE-based Client(s) and

Windows XPe-based Clients(s) (p.19).

EIZO monitors Set up and managed by the Network

Administrator.

Supports the remote monitor control (the EIZO

monitors equipped with USB upstream port) and

must be connected to stand type eClients via

USB.

The Amount of Manageable Clients

Up to 1000 Clients can be managed in one NA Service. Install several NA Services if

managing more than 1000 Clients.

1 2 3 4 5 6 7 8 9 10 11 ... 55 56

Comentários a estes Manuais

Sem comentários

Eizo eClient SC1 Manual do Utilizador Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com TVs e monitores Eizo eClient SC1