Eizo eClient 630L LCD Monitor Integrated Windows-based terminal Manual do Utilizador

For Microsoft Windows CE 2.12Version JPlease confirm the version of the software built in eClient, and refer to the suited User's Manual (Refer t

English 1-5. Overview Please refer these during 630L setup. 2. CONNECTING THE 630L p.11 3. SETTING UP THE 630L 3-1. WBT Setup Wizard p.14 3-2. Conne

English [User Name:]...Type the user name to connect the FTP Server. [Password:] ...Type the password for th

English 4. Click [Download]. The following message is displayed when you successfully download the software. Click [OK] and restart the 630L. NOT

English 7. PRACTICAL SETUP By utilizing the DHCP Option function of the DHCP Server, necessary information is supplied by the DHCP Server, and each se

English Hotkeys Disable Colors 256 colors Client Name eClient******(Last 6 digits of the Mac address) Server Location Automatically Found ICA Tab

English DHCP Server Settings Please open DHCP settings to configure each DHCP Option as follows. [Key] ...Set the va

English NOTE • Making a Registry File to Connect to a WTS/Web Server. Please refer to the example below, make a registry file, and save it in Unic

English "StartCmdLineArgs"="/L "ConnectionName"" ... Command argument to connect to a WTS "StartExe"=&

English 630L Settings The 630L’s default setting is set to enable DHCP Options. There is no need for extra settings. After initial setup, confirm

English 8. TROUBLESHOOTING This page presents problem that can be corrected by the user. If a problem persists even after applying the suggested reme

English NOTE • Please do not connect and disconnect repeatedly a keyboard or a mouse while the 630L is in operation, as the 630L may cause the unit

English 2. CONNECTING THE 630L This chapter explains how to connect the 630L to a WTS. 2-1. Setting up the 630L Please observe the following cautio

English 9. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NOTE • Never use thinne

English Mouse If you find that the pointer on the screen doesn’t move smoothly, your mouse needs to be cleaned. Periodically clean the mouse for yo

English 10. SPECIFICATIONS CPU National Semiconductor Geode GX1, 300 MHz Memory RAM; 64 MB, ROM; 32 MB LAN 10BASE-T/100 BASE-TX, Wake On LAN support

English Weight 5.2 kg (11.5 lbs.) (without the tilt stand 4.0 kg (8.8 lbs.)) Environmental Specifications Temperature Operating: 0°C to 35°C (32

English 11. REFERENCE 11-1. Attaching an Arm Stand The 630L can be used with an arm stand by removing the tilt stand and attaching the arm stand to th

English 3. Attach an arm stand to the 630L securely. WARNING Install the unit securely when attaching to an arm stand. When attaching an arm stand,

English INDEX A ADDING & CHANGING A CONNETION NAME...45 Administration Console...

English R RAS...38 RDP ...45, 46 Reference ..

English 2-2. Connecting the 630L NOTE • Before connecting the 630L, confirm the following: • The 630L is turned off. • The WTS is turned on. • Conne

English 3. Plug the power cord into the power connector. WARNING Use the enclosed power cord and connect to the standard power outlet of your count

English 3. SETTING UP THE 630L This chapter presents how to prepare for a connection with a WTS when the 630L starts up for the first time. 3-1. WBT

English 3. End User License Agreement page is displayed. Read the content and click [Accept] to continue. 3. SETTING UP THE 630L 15 15

English 4. IP address setting page is displayed. [Yes, use the IP information supplied by DHCP.] ...Select this wh

English 5. IP address page is displayed. [IP Address] ...Type the IP address of the unit. [Subnet Mask] ...

English 6. DNS and WINS setting page is displayed. This check box should be marked when DNS or WINS is used. NOTE • Skip the page by clicking [Next

English 7. Desktop area resolution and color settings page is displayed. Select the preferable display mode from the two available modes: · 1024

User’s Manual Version List A handling description changes with versions of the software built in eClient. Please refer to below. NOTE • The version o

English 8. Browser Setup page is displayed. Select [Yes] if you are setting up a web browser connection. Click [Next>] when finished. Refer to s

English 9. Browser URLs page is displayed. [Home Page:] ...Type the URL for the page to be displayed when Internet Explorer sta

English 10. Preferences page is displayed. [When do you want the browser to underline hyperlinks?] ...Select when y

English 11. History and Favorites page is displayed. [Persistent browser cache]...Click the check box if you want the “History” and “Cookies” port

English 12. Proxy server selection page is displayed. [Use proxy server]...Click the check box if you use proxy server for the web brows

English 13. Local Printer Setup page is displayed. NOTE • The following must be satisfied to install a local printer; * When a printer is connecte

English 14. Printer port selection page is displayed. Select the printer port. The 630L supports only LPT1 and COM1. Click [Next>]. 26 3. SETTI

English 15. Printer model selection page is displayed. Select a manufacturer and model of your printer. [User Defined]...Click t

English 17. Printer name setting page is displayed. Name the printer or use the indicated name. (Some programs do not support the Server and the pr

English 19. Another printer configuration page is displayed. Select [Yes] to configure another printer. Select [No] to finish printer settings. C

SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide b

English Click [Finish] in the last page to display a “Terminal Settings change” dialog box. (This dialog box is displayed only when there are changes

English 3-2. Connection with a LAN card The following details the installation of a LANs connection. NOTE • Please remove the lid on the side of th

English 3. The “Network” page is displayed. Select [Use PPP connection or another network adapter]. Click [Devices] tab. NOTE • [Use PPP connection

English 4. The “Devices” page is displayed. Double-click [Network]. 5. “Network Configuration” is displayed. Select a network driver for a LAN c

English 6. The connected network adapter’s properties are displayed. [IP Address] tab [Obtain an IP address via DHCP] ...

English Connection with a Cisco Aironet 1. Insert the Aironet Card, and “Unidentified PC Card Adapter” is displayed. Driver Name:...

English Click [OK]. (The message below will be displayed. Please follow the message and complete the settings.) Click [OK] to return to the “Termin

English NOTE • Double-click the [CISCO Aironet] icon on the “Devices” tab and set the detailed utility as needed. Refer to the instruction of the

English 3-3. Dial-Up Connection The following details the installation of a dial-up connection for RAS (Remote Access Service). No restriction of the

English 2. “Terminal Properties” is displayed. Click the [Network] tab. 3. The network setting window is displayed. Select [Use PPP connection

TABLE OF CONTENTS 1. INTRODUCTION ... 6 1-1. General Description ...

English 4. The dial-up setting window is displayed. NOTE • Enter your information in the pertinent fields. [Connection Name]...Choose a c

English [Dialing Properties...] ...Click the button to set information of the sender. [When dialing from:] ...

English [Device Configure...] ...Click the button the detailed settings of the modem. (Please refer to the instructio

English NOTE • When changing settings in the [Device Properties], click the [Call Option] tab before clicking [OK] to close the window. [TCP/IP Se

English [Primary DNS], [Secondary DNS] ...Enter IP address of the primary DNS and IP address of the secondary DNS. [

English 4. ADDING & CHANGING A CONNETION NAME This chapter shows how to add, delete, and modify connection names to a WTS. All the settings are

English In Use of RDP Protocol 1. Display [Terminal Connection Manager]. Click the [Configure] tab and [Add...] to set the connection information

English 3. “WTS Connection Wizard” is displayed. [Name]...Type the connection name to the Server. Name the connectio

English 4. Automatic Logon setting page is displayed. Type the name, the password, and the domain name of the WTS beforehand to enable an Automatic

English 5. Specifying an application to run after connecting to a WTS is displayed. Select whether to display the Windows desktop screen or start

INDEX... 116 TABLE OF CONTENTS 5

English 6. The last page of the “WTS Connection Wizard” is displayed on the screen. Click [Finish] to return to the “Terminal Connection Manager” di

English In Use of the ICA protocol 1. Click the [Configure] tab. Click [Add...]. 2. “New Connection” dialog box is displayed on the screen. Sele

English 3. “Specify Connection Type” dialog box is displayed. [Network Connection]...Select for network connection. [Dial-In Connection]...

English [Server Group]...Select the WTS Group to connect. (A WTS Group consists of [Primary], [Backup 1], and [Backup 2]. The WTS wi

English 5. “Dial-In Devices” dialog box is displayed. NOTE • Enter your information in the pertinent fields. • A dial-in connection is not availabl

English [Connection Preference] [Baud Rate]...Set the data transmission rate from 110 to 115,200. [Data Bits]...

English 6. A title for the ICA connection page is displayed. Type a connection name of the WTS. Click [Next]. 7. An application selection page is d

English 8. Automatic logon settings page is displayed. Type the name, the password, and the domain name of the WTS beforehand to enable an Automat

English 10. Compression, encryption, and sound settings page is displayed. [Use Printer Configuration Utility] ...C

English [Encryption Level:] ...Encryption level can be selected from RC5 (128 bit - Login Only), basic, RC 5 (40 bit), RC5 (56 bit), RC5 (

English 1. INTRODUCTION Thank you very much for purchasing the EIZO eClient 630L. 1-1. General Description The 630L is a terminal which displays app

English 11. Firewall settings page is displayed. NOTE • These settings are effective when connecting to the WTS through internet. • If no change is

English This completes the setup of the 630L for connection to a Server with the ICA protocol. NOTE • Please repeat the step 1 to 11 when you add

English 4-2. Deleting a Connection This function deletes an existing Connection Name. 1. Display the “Terminal Connection Manager” dialog box. 2. Clic

English 4-3. Editing a Connection This function modifies attributes of the WTS connections. 1. Display the “Terminal Connection Manager” dialog box.

English • For ICA Connection (Please see pages 51 to 60 for each setting.) [Server/Dial-In] tab ...Either Server or Dial-In tab is display

English NOTE • When changing settings in the Dial-In connection, click and show the [Call Option] tab of [Device Properties] of the [Dial-In] tab b

English 4-4. Setting an Autostart Connection This function configures a connection to start automatically each time the 630L is turned on. (This func

English 5. LOGON & LOGOFF This chapter shows how to log on to and log off from a WTS. 5-1. Logon to a WTS / Logoff from a WTS Logon to a WTS 1.

English (1) To connect and log on to a WTS through local network: Go to step 3. (2) To connect and log on to a WTS with dial-up connection: Click an

English Multi Session You can log on to the WTS with the several connection names, and switch the active sessions. • Logon 1. Log on with a Connecti

English 1-2. Features • Lower TCO* *TCO (Total Cost of Ownership) Expense for managing and administrating computer systems. • Saves Space and Po

English Logoff from the WTS If your 630L starts its operation with a desktop 1. Log off from the WTS. (1) Close all applications. (2) Select [Start]

English If your 630L starts its operation with an application 1. Log off from the WTS. Close applications to log off from the WTS. “Terminal Connec

English 5-2. Opening/Closing a Local Web Browser Opening a Local Web Browser 1. Turn on the 630L. 2. “Terminal Connection Manager” dialog box is displ

English Closing a Local Web Browser 1. Close the local web browser. Select [Exit] under the [File] on the menu bar and close the local web browser.

English 6. USING THE TERMINAL PROPERTIES This chapter presents how to modify all settings of the 630L using the “Terminal Properties”. To display th

English Resetting to Default 1. Click [Reset the terminal to factory-default property settings] check box. 2. The “System Settings Change” dialog bo

English 6-2. Input Devices Settings Click the [Input] tab to modify keyboard, NumLock Key, and mouse characteristics. Keyboard Settings [Keyboard] [L

English Mouse Settings Click [Properties...] to display the [Mouse Properties] [Button Configuration] ...Assigns the primary mouse button and

English 6-3. Colors & Power Save Settings Click the [Display] tab to modify display parameters such as colors, screen saver, and power save. Reso

English Brightness [Contrast/Brightness] [Settings] ...Enables to adjust the brightness of the screen. [Enable Contrast/Br

English 1-4. Controls & Connectors Front (1)(2)(3)(4) (1) Power Switch (2) Power Indicator Green Operation Screen saver mode Yellow Power save

English 6-4. Network Settings Click [Network] tab to set network information for the 630L. NOTE • All settings shown here are previously adjusted on

English [DHCP Options...]...Click this to receive essential information about the 630L from the DHCP server every time the 630L is turned

English NOTE • The [Terminal Settings Change] dialog box will not be displayed when [Terminal Name], [DHCP Options], and [Advanced Network…] are chan

English 6-5. Printer Settings Click [Printers] tab You can add, delete and change the settings of the printer in this section. NOTE • The 630L sup

English Adding another printer settings This enables to add a printer when no printer is connected to the LPT1 port and COM1 port. 1. Select LPT1 or C

English Modifying the settings This enables to delete printer settings when a printer is connected to the LPT1 port or COM1 port. 1. Select LPT1 or

English 6-6. Browser Settings Click [Web] tab to adjust the browser settings of 630L. [Enable Web Connection] ...Click the check box for web connect

English [Preference]...Click here to set hyperlink and font size. [When do you want the browser to underline hyperlinks?]

English [Proxy Information]...Click this for proxy settings. [Access the Internet using a proxy server] ...

English 6-7. Dial-Up (PPP) Connection Settings Click [PPP] tab to adjust the dial-up settings of 630L. The following details the installation of a

English Rear (14)(15)(17)(16) (5)(6)(7)(8)(9)(10)(11)(13)(12) (5) Mouse Connector (6) Keyboard Connector (7) Serial Port (RS-232C) (8) Parallel Con

English 6-8. ICA Settings Click [ICA] tab to confirm information about Citrix ICA Client version and to change the settings when connecting to the Cit

English General Settings of the ICA Connection You can change the settings for the ICA Connection. 1. Click [Settings...]. 2. “Global ICA Client Set

English [Firewall Settings] tab ...Change the settings of Firewall and SOCKS proxy server (see page 60). This setting change is displayed when

English 6-9. Device Settings Click [Device] tab to confirm and set LAN card properties and speakers of the 630L. Network Adapter Settings Configure

English Sound Settings Configure the sound properties of the 630L. 1. Double-click the “Volume & Sounds” icon. 2. “Volume & Sounds Properties”

English Date/Time Settings Configure the date/time properties of the 630L. NOTE • The settings are referred when the client time zone function of t

English 6-10. Product Information, Security & Updating Software Click [System] tab to confirm information about the 630L, to set the security, an

English Security Settings This enables settings on network information of the WTS invisible to prevent from undesirable change. When the security i

English CANCELING SETTINGS 1. Display “Terminal Connection Manager”. 2. Press [Ctrl], [A], and [F2] at the same time. 3. “Enter Security Password” dia

English Software Updating You can update the built-in software. NOTE • Before updating, please complete the following: * Copy the update file (*.