Eizo FlexScan Color LCD Monitor S2242W Manual do Utilizador

ImportantPlease read PRECAUTIONS, this User’s Manual and Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage

10Chapter 1 Features and Overview1-4 Functions and Basic OperationTo adjust the screen and color1 Screen Adjustment (Automatic Adjustment)● To adju

11Chapter 1 Features and OverviewInformation● Displaying Monitor Infomation [Information]To make useful settings/adjustmentsPower-save Settings● Sett

12Chapter 1 Features and OverviewBasic operation of Adjustment menu[Displaying Adjustment menu and selecting function](1) Press . The Main menu appe

13Chapter 2 Settings and Adjustments2-1 Utility DiskAn “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the

14Chapter 2 Settings and Adjustments2-2 Screen AdjustmentDigital InputWhen digital signals are input, images are displayed correctly based on the pr

15Chapter 2 Settings and Adjustments3 Perform the auto adjustment again with the analog screen adjustment pattern displayed.●  Toadjustickering,

16Chapter 2 Settings and Adjustments● To correct screen position [Position](1) Choose <Position> from the <Screen> menu, and press .The

17Chapter 2 Settings and Adjustments2-3 Color Adjustment●To select the display mode (FineContrast mode)FineContrast allows you to select the best d

18Chapter 2 Settings and Adjustments●To perform advanced adjustmentsIndependent setting and saving of color adjustment are available for each FineCo

19Chapter 2 Settings and Adjustments●To adjust the color temperature [Temperature]The color temperature can be adjusted. The color temperature is no

2 [Location of Caution Statement]Ex. Height adjustable standAs an ENERGY STAR® Partner, EIZO NANAO CORPORATION has determined that this product meets

20Chapter 2 Settings and Adjustments●To adjust the hue [Hue]This function allows you to adjust the hue. If you set the hue to a high value, the imag

21Chapter 2 Settings and Adjustments2-6 Setting On/Off for the automatic brightness adjustment function [Auto EcoView]The sensor on the front side

22Chapter 2 Settings and Adjustments2-8 Turning off the monitor automatically [Off Timer]This function allows you to switch the setting to turn off

23Chapter 2 Settings and Adjustments2-10 Screen Size Selection● To change screen size [Screen Size]The image with the resolution other than the reco

24Chapter 2 Settings and Adjustments2-11 Setting Adjustment Menu Display● To update menu settings [Menu Size/Menu Position/Menu Off Timer/Translucen

25Chapter 2 Settings and Adjustments2-12 Setting Orientation● To set the orientation of the Adjustment menu [Orientation]This function allows you to

26Chapter 2 Settings and Adjustments2-15 Enabling/Disabling DDC/CI communicationThis function allows you to enable/disable the DDC/CI communication.

27Chapter 2 Settings and Adjustments2-19 Resuming the Default Setting [Reset]There are two types of Reset. One is to reset the color adjustment only

28Chapter 3 Connecting Cables3-1 Connecting Two PCs to the MonitorTwo PCs can be connected to the monitor through the DVI-D and the D-Sub mini 15 pi

29Chapter 3 Connecting Cables●To set input signal selection [Input Signal]The monitor recognizes the connector through which PC signals are input.Wh

3 Notice for this monitorThis product is suited to creating documents, viewing multimedia content, and other general purposes.This product has been ad

30Chapter 3 Connecting Cables3-3 Connecting Peripheral USB DevicesThis monitor has a hub compatible with USB. Connected to a PC compatiblewith USB or

31Chapter 4 TroubleshootingChapter 4 TroubleshootingIf a problem still remains after applying the suggested remedies, contact your local dealer.• N

32Chapter 4 TroubleshootingProblems Possible cause and remedy5. Afterimages appear. • Use a screen saver or off timer function for a long-time imag

33Chapter 4 TroubleshootingProblems Possible cause and remedy17. The monitor connected with the USB cable is not detected. / USB devices connected t

34Chapter 5 ReferenceChapter 5 Reference5-1 Attaching an ArmThe stand can be removed and replaced with an arm (or another stand) to be attached to

35Chapter 5 Reference5-2 Folding the EZ-UP standPerform the following procedures to fold the stand when re-packing a monitor with an EZ-UP stand.1

36Chapter 5 Reference5-3 SpecicationsS2232WLCD Panel 22.0-inch (560 mm) TFT color LCD with anti-glareViewing angle: Horizontal 178°, Vertical 178°

37Chapter 5 ReferenceMass Main unit (including Height adjustable stand)Approx. 9.6 kg (21.2 lbs.)Main unit (including Tilt stand)Approx. 7.6 kg (16.

38Chapter 5 ReferenceAnalog Input Signal (Sync) Separate, TTL, positive/ negativeComposite, TTL, positive/ negativeAnalog Input Signal (Video) Analog

39Chapter 5 ReferenceVertical Scan Frequency Analog: 55-76 Hz (Non-interlace)(1920 × 1200: 55-61 Hz)Digital: 59-61 Hz (Non-interlace)(VGA TEXT: 69-71

4 CleaningAttention• Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet

40Chapter 5 ReferenceEnvironmental ConditionsTemperature Operating temperature: 5 °C - 35 °C (41 °F - 95 °F)Storage temperature: -20 °C - 60 °C (-4 °

41Chapter 5 ReferenceOutside Dimensions S2232W/S2242W (Height adjustable stand)unit : mm (inch)53.8(2.12)85(3.35)475.8(18.7)17.6(0.69) 17.6(0.69)511(

42Chapter 5 ReferenceS2232W/S2242W (EZ-UP stand)unit : mm (inch)53.8 (2.12)85(3.35)298.1(11.7)333(13.1)17.5(0.69)17.6(0.69)511(20.1)475.8(18.7)17.6(

43Chapter 5 ReferenceS2432W (EZ-UP stand)unit : mm (inch)27.7(1.09)25°172°172°90°129.3(5.1)532(20.9)56.3(2.22)85(3.35)SWIVELØ272(10.7)326(12.8)367(14

44Chapter 5 Reference• D-Sub mini 15-pin connector Pin No.Signal Pin No.Signal Pin No.Signal 1 Red video 6 Red video ground 11 NC*2 Green video 7 Gr

45Chapter 5 Reference5-4 GlossaryClockThe analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics sys

46Chapter 5 ReferenceResolutionThe LCD panel consists of numerous pixels of specied size, which are illuminated to form images. This monitor consist

47Chapter 5 Reference5-5 Preset TimingThe following table shows factory preset video timing (for analog signal only).Mode Dot clockFrequencyPolarity

48 Congratulations!The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and t

49 For U.S.A. , Canada, etc. (rated 100-120 Vac) OnlyFCC Declaration of ConformityWe, the Responsible Party EIZO NANAO TECHNOLOGIES INC.5710 Warland D

5CONTENTS● To adjust brightness of non-display area [Border Intensity] ... 232-11 Setting Adjustment Men

50 Hinweise zur Auswahl des richtigen Schwenkarms für Ihren MonitorDieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Stand

Hinweise zur Auswahl des richtigen Schwenkarms für Ihren MonitorHinweis zur Ergonomie

6CONTENTSChapter 5 Reference ... 345-1 Attaching an Arm ... 345-2 Fol

7Chapter 1 Features and OverviewChapter 1 Features and OverviewThank you very much for choosing an EIZO color LCD monitor.1-1 Features• 22” wide f

8Chapter 1 Features and Overview1-2 Controls and FunctionsEx. Height adjustable stand1 2 3 4 5 6 7 98111912 1413 15101720211816Adjustment menu (*Scr

9Chapter 1 Features and Overview1-3 Compatible Resolutions/FrequenciesThe monitor supports the following resolutions.Analog InputResolution Frequenc